







When you first open a graphics tool to make a logo, the first word you meet is “vector.” You vaguely know how it differs from a photo and why logos are always supposed to be made as vectors, but standing in front of an empty artboard, you don't know where to start. The pen tool doesn't move the way you expect, and the curves keep coming out crooked.
Yet most complicated-looking logos and icons start from very simple shapes. Combine a circle and a rectangle, subtract the overlap, round the corners, tidy a few points, and a convincing shape appears. Drawing from scratch with the pen is needed less than you'd think. Vector graphics is less a skill of drawing than a skill of assembling.
In this article, we start from what vector graphics is and follow the flow of making one logo with shapes, the pen, and pathfinder.
1.Learn how vectors and pixels differ, and why logos are made as vectors.
2.See how to block in basic forms quickly with the shape tools.
3.See how to combine and subtract shapes into new forms with pathfinder.
4.See how to refine curves with the pen and point editing.
5.See how to finish the logo with color, stroke, and export.
A pixel image such as a photo is a mosaic of tiny dots of color. It remembers the picture with a fixed number of dots, so when enlarged, the dots show up and it looks blurry or stair-stepped. A vector graphic, on the other hand, remembers a shape as the positions of points, the lines that connect them, and the color that fills the inside. It's like storing a description: “start here, follow a line that curves like this, and end over there.” So whether it's used at business-card size or on a banner as big as a building's outer wall, it's redrawn and stays just as sharp.
That's why logos are made as vectors. A logo is used in places of wildly different sizes, such as app icons, website headers, business cards, signs, and merchandise. If you make it a vector from the start, one original is enough wherever it goes. Changing colors or fixing part of the shape is easy too, because the points and lines remain alive.
Of course, vectors aren't right for every picture. Pictures with subtle color gradations, like photos, are expressed better by pixels. So a good graphics tool has to let you move between the two. In Opkle Editor, you can harden a vector shape into a pixel picture with right-click Convert › Rasterize, and conversely turn a photo into shapes with vector tracing. Think of it as dividing the work: the logo as vectors, and the photo the logo sits on as pixels.
Most logo work begins with shape tools. Click the Shapes section in Opkle Editor and ten forms unfold, including rectangle (R) and ellipse (O), plus triangle, polygon, star, badge, arc, and donut. Choose one and drag over the artboard to draw it; hold ⇧ while dragging to lock the proportions, giving a square or a perfect circle, and hold ⌥ to draw from the first click as the center. Options that differ by shape, such as a polygon's number of points, a star's depth, or a donut's inner size, can be changed by right-clicking the canvas with the tool selected.
At this stage, rather than trying to draw the finished form, it's better to break the logo's big masses into shapes. For example, a speech-bubble logo can be split into one rounded rectangle and one small triangle, and a key-shaped logo into one circle and a few long rectangles. If you want rounded corners, use the corner radius tool to pick and drag only the corners you want, and with corner smoothing, the rounded corners blend more smoothly into the straight lines, giving the sleek shape of an app icon.
It's also good to set exact balance at this stage. Select several shapes and use the alignment group to center them or distribute the spacing evenly, and type X, Y, W, and H as numbers in the transform section on the right to match sizes. In a logo, even a small misalignment stands out, so the habit of matching by numbers rather than by eye keeps the result neat.
Once you've built the frame with shapes, it's time to weave them into one form. Select two or more shapes and use the pathfinder group in the toolbar to make a new shape. Unite merges the selected shapes into one, subtract carves the lower shapes out in the shape of the top one, and intersect keeps only the overlapping part. Overlap two circles slightly offset and subtract to get a crescent, and unite a rounded rectangle and a triangle to get a speech bubble.
Subtract uses the shape placed on top as its reference, so if the result isn't what you expected, check the layer order first. When you need a single shape with a hole in it, like a donut, use a compound path; find “Make Compound Path” in Quick Actions (⌘/).
If you want to wrap one more border around the logo, try offset. It creates a new path outward or inward by a fixed distance, so exactly the same spacing holds everywhere. A job that's easy to get subtly wrong by hand finishes cleanly with one number. For a logo where the same shape repeats around the edge, like petals or gear teeth, use the radial option of Repeat. Make just one piece, set the count and spacing, and it arranges the pieces around a circle for you.
Curves that you can't make from shapes alone are drawn with the pen. Press P to choose the Path tool and click the artboard to place a point; click and drag to make a curve. Click the first point again to close the shape, or press Enter if you want to end with an open line. Pressing ⌘Z while drawing cancels just the last point, so it's easier on the mind to draw by adjusting as you go rather than trying to be perfect from the start.
The trick to using the pen well is placing few points. The more points, the lumpier the curve and the harder it is to fix. Put points only where the curve bends, and practice refining the bend by dragging the handles extending from the points. You can move the points of a path you've already drawn by pressing Enter or picking them one at a time with the node selection tool, and add or remove points with Add Point · Remove Point. Jagged parts even out when you rub them with the Smooth tool.
One thing to know: shapes such as rectangles and stars are “live shapes” with options like number of points, so you can't edit their points directly. Choose right-click Convert › Convert to Path and it becomes a path you can edit freely, but after that you can no longer use the shape options, so it's wise to duplicate the original before converting if you need it.
Hand drawings and text can be logo material too. A sketch or handwriting on paper can be brought into the canvas as a photo and turned into shapes with vector tracing, and if the result is complicated, simplify to tidy the number of points. For a logo made of letters, right-click Outline to turn the text into shapes, then combine it with other shapes using pathfinder. After converting to outlines you can't edit it as text, so it's good to get in the habit of duplicating the original text.
When the shape is done, apply color. In the Fill section on the right you can pick a solid color or switch to a gradient, and you can stack several fills to add expression. But logos often have to be printed small and in a single color, so it's safer to finish in solid color first and make a separate gradient version when needed. For a logo that uses strokes, convert the strokes to fills with right-click Convert › Expand Stroke. That way the stroke thickness keeps its proportion even when you resize.
Export the finished logo in a format that fits where it will be used. For a logo going on a website or app, exporting as SVG keeps it sharp on any screen, and if you need a PNG with a transparent background, export at 2x or 3x scale. For print, exporting as PDF is the safer choice. If you set the format and scale for each layer in advance, you don't have to export one by one every time you edit the logo; a single ⇧⌘E exports everything you've set up.
Your first logo doesn't have to be perfect. After going through the order of building a frame with shapes, weaving it with pathfinder, and refining with the pen a few times, you'll start to see, even in other people's logos, which shapes were overlapped to make them. From then on, vector graphics becomes less drawing and more engineering.
Key Takeaways
Vector graphics store shapes as descriptions of points and lines, so they stay sharp at any size, while photos are best handled as pixels.
Rather than drawing a logo from scratch with the pen, it's easier to block in the big masses with shapes, balance them by numbers, and weave them with pathfinder.
Offset and radial repeat let you make borders and repeating patterns that are hard to match by hand.
With the pen, put points only where the curve bends and refine curves with the handles; hand drawings become material through vector tracing, and text through outlines.
Finish the logo in solid color first, and export it in a format that fits where it's used, such as SVG, PNG, or PDF.
